Industrial painting is a high-hazard job that can result in severe chemical contamination if proper safety rules aren’t followed. While you can’t deny the many benefits offered by industrial paints and coatings, you must be aware of the health and safety risks they pose. These paints are comprised of several substances and particles that can be harmful if inhaled or absorbed through the skin. By following these safety tips for industrial painting and finishing, you can limit your exposure to toxic and unhealthy substances.
Waterproof protective equipment
Working in the industrial painting and coating industry means handling paints, sanded materials, and solvents daily. Therefore, wearing a long-sleeved shirt, full-length pants, closed sneakers, and nitrile gloves is a necessary precaution. In addition, wearing waterproof protective equipment will ensure that you remain safe from the inherent risks while painting.
Well-ventilated workspace
When you’re working with solvents and paints, it’s crucial to have proper ventilation in the room. Setting up this system will reduce the risk of health hazards to a significant extent. Make sure the windows and doors are open, and fans or other devices maintain fresh airflow in the room. These techniques will remove unpleasant odor and harmful chemicals in the air, keeping your workspace clean and healthy.
High-quality dust mask
When you’re sanding, finishing, coating, or painting with potent substances, you must wear a dust mask to keep the particles from entering your lungs. If needed, you can also use a respirator depending on the materials. Please note that a dust mask may miss some tiny particles, and as stated previously, proper ventilation is a must.
Protect your eyes
One of the essential safety tips for industrial coating and painting is to wear safety goggles. This precaution is especially critical when you’re painting above your head. The paint might splatter or drip over your eyes, leading to potentially dangerous conditions. You can also wear a facemask to keep the particles out.
With these safety tips for industrial painting, you can rest assured that your workspace is clean, and you’re always protected against harmful substances.
Enviro-Tech Coatings metal finishing services include glass beads, walnut shells, and ceramic media finished surfaces. We provide metal finishing for aluminum, steel, and stainless steel fabrications. We have the capability to meet the standards for food and beverage parts and equipment. Our complete services cover painting, specialty coatings, and metal finishing services to a wide range of industries. We maintain Air Permits and are a fully approved site for blasting and painting. If you would like a bid on a project, please contact us at 989-495-0000 or visit enviro-tech-coatings.com.